Shop for your specific vehicle to find parts that fit.
Currently Shopping For:

{{currentVehicle.year}} {{currentVehicle.make}} {{currentVehicle.model}} {{currentVehicle.submodel}} {{currentVehicle.engine}}

No Vehicle Selected

Shop Without Vehicle
Manage Vehicles
No Other Vehicles Exist
SET UP YOUR VEHICLE (Get the exact fit for your vehicle)
{{vehicleFormVm.currentVehicle.year}} {{vehicleFormVm.currentVehicle.make}} {{vehicleFormVm.currentVehicle.model}} {{vehicleFormVm.currentVehicle.submodel}} {{vehicleFormVm.currentVehicle.engine}}
Browse Parts
Change Vehicle Shop Without Vehicle
While shopping the rest of the site, we will filter all results to only show products that fit your vehicle

KAX® 245-1133 Mass Air Flow Sensor

5 star rating
Write A Review
   |   SKU: KX2SAM02700

Vehicle Info Required to Guarantee Fit

Sold Out
  • [CAUTIONS] Before purchasing this MAF sensor, Please check the plug & fitment notes & filter system & description for accurate information to confirm compatibility. Replace Part Number: 245-1133 28164-3C100, AF10058, MA277, 15926193, 221139,SU9177, 5S7689, 74-10140, 281643C100, 0350023 , 10340478, 15900023, 15900024, 15911983
  • [Replacement MAF sensor]: Compatible for 2008 Enclave,2005 - 2009 LaCrosse,2006 - 2011 Lucerne,2006 - 2007 Rendezvous,2005 - 2007 Terraza,2006 - 2011 DTS,2005 - 2009 Equinox,2006 - 2009 Impala,2006 - 2012 Malibu,2006 - 2007 Monte Carl,2005 - 2008 Uplander,2007 - 2008 Acadia,2005 - 2010 G6,2005 - 2008 Grand Prix,2005 - 2006 Montana,2006 - 2009 Torrent,2007 - 2009 Aura,2007 - 2008 Outlook,2005 - 2007 Relay,2008 - 2010 Vue
  • [High Precision Data]: Please clean out the air box and replace the air filter before installating this MAF sensor, or the Code and Check Engine Light may keep showing even if you replace a new MAF. It can measure the volume and density of air entering the engine, providing highly accurate airflow readings to the ECU over a wide range of ambient temperatures, thereby ensuring efficient engine operation
  • [OE Quality]: KAX mass air flow sensor meter is manufactured in accordance with OEM specifications, It is durable, resistant to oxidation and high temperature, ensuring long-term stable performance. Each product must go through multiple inspections and tests before leaving the factory to ensure 100% accurate data transmission to the engine system
  • [Replace in Time]: Replacing the MAF sensor can improve fuel efficiency, assist the catalytic converter to better eliminate harmful gases in the vehicle exhaust system, reduce emissions, and prevent premature damage to the catalytic converter. When your vehicle is running with rough idling, stalling, loud noise, and fault lights/code, indicating that your mass air flow sensor needs to be replaced

KAX is a brand that focuses on the auto repair area, striving to give drivers a safer driving experience. We believe that great quality can save lives, so we utilize the most up-to-date technology, and manufacture to the highest standards for reliable and durable performance. Our portfolio includes oxygen sensors, oxygen sensors sockets, mass air flow sensors, and many other OE standard auto parts. We value and respect every life, and will keep providing quality auto parts as well as great you experience in the future.

Fits the Following Vehicles:

2008 Enclave

2005 - 2009 LaCrosse

2006 - 2011 Lucerne

2006 - 2007 Rendezvous

2005 - 2007 Terraza

2006 - 2011 DTS

2005 - 2009 Equinox

2006 - 2009 Impala

2006 - 2012 Malibu

2006 - 2007 Monte Carl

2005 - 2008 Uplander

2007 - 2008 Acadia

2005 - 2010 G6

2005 - 2008 Grand Prix

2005 - 2006 Montana

2006 - 2009 Torrent

2007 - 2009 Aura

2007 - 2008 Outlook

2005 - 2007 Relay

2008 - 2010 Vue


KAX mass airflow sensor installation steps:

1. Turn off the car first, then confirm the installation position of the mass airflow sensor, which is in the tube of the intake pipe, after the air filter element and before the throttle.

2. Reset the ECU data and restore it to the original state. Remove the negative wire of the car battery to ensure that the car circuit is powered off (if there is no sound when pressing the horn of the steering wheel, it proves that the power supply of the car has been disconnected).

3. Replace and install. Remove the screws and plugs of the mass airflow sensor, and remove the faulty mass airflow sensor and replace it with a new one. (Before installation, please check whether the new air flow sensor is leaking or damaged. Make sure that the direction of the air intake on the flow housing is correct before and during installation.)

4. After completing the installation, reconfirm that the mass airflow sensor is not loose and the pipeline is not leaking. Reconnect the negative wire removed before, and confirm that the ECU data has been reset and restored to the original state.

5. Ignition confirmation. Please do not start the vehicle immediately after the installation. Wait for 60 seconds after the vehicle is powered on, and then start the vehicle.

(1) If it is a key-started vehicle, please turn the car key to the "ACC" position. Wait for 60 seconds after the vehicle is powered on, and then start the vehicle;

(2) If it is a one-button start vehicle, please press the one-button start button (without stepping on the brake pedal). Wait 60 seconds, and then step on the brake pedal to start the vehicle.

Below are the real customer reviews from all online marketplaces. Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristic.
5 /5 (2 Reviews)
Sort By

Have a question about this product? Ask here.

• 05/31/2022

• 05/31/2022 • REPLY
All {{faq.answers.length}} Answer(s)
Please enter the correct Email
Copyright ©2022 SuncentAuto.com. All rights reserved.