If you are wondering how to do the fog light alignment is important, then this is the perfect article for you. Read here to learn the step-by-step process for aiming fog lights.
Adjusting the fog lights is not only important for you to deal with bad weather conditions but also it helps to prevent potential accidents on-road. If your vehicle's fog lights are not adjusted properly, then it can simply blind the other motorists on the road leading to safety hazards.
When a fog light is not aimed properly towards the surface, it can shine light into other drivers' eyes, which will create a distraction for them. To avoid this, you follow the below-mentioned steps and drive safely.
How To Adjust Fog Lights
Here are three simple steps that are going to help you with adjusting your vehicle’s fog lights.
#1 Mounting of the Fog Lights
Fog lights are made especially for bad weather conditions. They help to reduce glare and penetrate the fog for you to see the road clearly. However, if the fog lights are not mounted properly, then they might not do the job they are meant to do.
It is recommended to mount the fog lights above or below the bumper. Although make sure that it is not mounted 10 inches off the ground. It means you should keep it not more than two feet above the ground.
With these measurements, you can easily aim towards the 24 inches gap above the road surface, where fog usually gets collected. Now, let’s find out how to adjust the fog lights using a flat wall.
#2 Locate A Flat Wall And Mark
If you want to double-check that the fog lights are properly mounted and adjusted or not, then checking on a flat wall will do the trick. Or maybe you haven’t adjusted the fog lights ever, then this is the simple way to do it.
Keep a marker handy along with a measuring tape that will help you with this task. Find a wall that is 90 degrees flat. Park your vehicle at exactly 25 feet from the wall on a flat surface that will help you to get accurate measurements.
Turn on your vehicle's fog lights at 25 feet' distance and measure from the ground to the center of the fog lights on the wall. Simply mark the height of the fog light on the wall. You can use a marking pen or a marking tape.
#3 Adjust Fog Lights As Per Markings
Once the marking is done, now you can easily adjust the fog lights. Ensure that the fog lights are four inches lower than the marking you have on the wall. With this, you have successfully adjusted the height of your fog lights.
How Many Times Should You Fix Fog Lights Alignment
Keep in mind, adjusting fog lights is not a one-time task. Due to the constant vibration of a vehicle, while driving, the alignment can easily get disturbed.
Whenever you notice a difference in your fog lights compared to the other vehicle's fog light on the road, you should simply follow the above-mentioned three steps to fix it again.
Things You Need To Adjust Fog Lights:
- Measuring tape or Marking tape
- Flat parking space
- Flat wall
- Time: 60 minutes (approx.)
Buy Quality Automotive Parts At SuncentAuto.com
If you are looking forward to buying quality Automotive parts then you should definitely check out then you should check out SuncentAuto.com. Here, you will not only get a wide range of products but also these products are available at reasonable prices.
One of the best parts about using this website is that you get to filter out the products which are compatible with your vehicle's year make and model. This means you don’t have to waste your time anymore in looking at those products that are not even compatible with your vehicle.
FAQs About Fog Light Alignment
Q. Do fog lights need an alignment?
Yes. It is highly recommended to place the fog lights 10 to 24 inches above the road surface, which means it should be ideally below or on the bumper. If not placed properly, it can cause trouble to other drivers on the road.
Q. What angle should fog lights be at?
It should be at a 90-degree angle.
Q. How do you level fog lights?
Keep fog lights positioned 24 inches apart and then park the vehicle near a flat wall, keeping a distance of 25 feet from the wall. Measure the fog lights center to the ground and then use adhesive tape for noting the exact height of the fog lights on the wall. Simply adjust the fog lights 4 inches lower than the markings and you are done.
Conclusion
In conclusion, adjusting your fog lights is an essential process that you should do from time to time. Fogs lights are important when you are driving in bad weather conditions including heavy fog, rain, snow, or even sand storm.
If your vehicle’s fog lights are not aligned properly then they can cause you and other drivers on the road trouble in seeing the road properly. Hope this article helped you to understand how to adjust fog lights.
Leave a comment