All-in-One, matched from the factory - 4″ DPF pipe, EGR delete, and Mini Maxx V1 tuner ship as one order; connectors, gaskets, and tune compatibility are confirmed in one place, with a single after-sales entry point instead of three sellers.
Tune first, then hardware — fewer dead ends - The kit is designed so the tune is ready before you remove the DPF/EGR, avoiding the common trap of finishing the install, getting codes or a no-start, and then hunting for a tune.
EGR + Throttle Valve deleted together — no weak point left - Cuts the soot source and removes the intake throttle valve’s unexpected-closing risk at the same time; more thorough than an EGR-only delete.
Direct fit for 2007.5–2009 6.7 Cummins - 4-inch is the sweet spot for stock/light-mod setups: good flow velocity, crisp low-end response, less drone than 5-inch; Mini Maxx V1 is the best-matched tuner for this year range.
This configuration is locked to: 2007.5–2009 model years · 4-inch DPF Delete Race Pipe · EGR Delete (includes Throttle Valve) · Mini Maxx V1 Tuner. Do not mix with 2007 Cummins; not compatible with Cab & Chassis commercial chassis.
2007.5–2009 is the first model year range in which the 6.7 Cummins was equipped with the complete EGR + DPF architecture. Under high mileage, short-trip commuting, or heavy-load conditions, this emissions hardware itself can turn from a "compliant component" into a failure source: DPF regenerates frequently until non-regenerable clogging occurs, the EGR Cooler leaks coolant, and intake soot slows VGT response.
Buying the DPF pipe, EGR kit, and tuner separately means you need to confirm connector, gasket, and tune compatibility with three different sellers; when a problem occurs, it is easy to get into three-way fault-attribution back-and-forth between multiple sellers. All-in-One consolidates hardware and tune into the same order, with only one after-sales entry point.



Note: the delete kits are shipped in multiple packages to ensure safe and organized delivery. Please check all parcels upon arrival to confirm you have received the complete set.
Directly replaces the factory DPF/DOC section; the straight-through design eliminates regeneration backpressure. After modification, the exhaust note will be noticeably louder than stock, but in-cabin noise will also increase at highway cruise.
Removing the EGR Cooler cuts off hot exhaust gas backflow at its source, eliminating the path for carbon buildup in the intake manifold/intake valves. Removing the Throttle Valve at the same time eliminates another potential point of failure in the intake path (accidental valve closure could lead to air supply interruption, engine stalling, or even turbocharger damage). Removing only the EGR while retaining the throttle valve only solves half the problem.
Mini Maxx V1 is preloaded with delete tunes; its core task is to turn off the DTC and CEL triggered after DPF/EGR hardware deletion and prevent limp mode. It supports SD card updates and custom calibration, and comes with 20+ real-time gauges (EGT, coolant temp, boost, etc.). For 2007.5–2009 6.7 Cummins, V1 is the best-matched, most direct tuner option—preloaded and ready; no need to pay for EZ Lynk cloud subscription or extra support period.
This kit's fitment range is 2007.5–2009 Ram 2500 / 3500, 6.7L Cummins. Pay special attention to:
| Option | What It Removes/Replaces | Performance Effect | Sound | Who It's For |
|---|---|---|---|---|
| DPF Delete | Replaces only the DPF, retains upstream CAT/DOC | Eliminates DPF backpressure, but CAT may still be a restriction | Smallest change | Limited budget, only wants to solve DPF backpressure, does not want it too loud |
| DPF/CAT Delete | Replaces DPF + CAT/DOC together | Significant backpressure release, best value | Noticeably louder, possible drone | Mainstream choice for most: balanced performance, sound, and price |
| Turbo-Back | Full exhaust from turbo outlet to tail section | Most free-flowing exhaust; theoretically the most thorough performance release | Loudest | Pursuing full-system upgrade, unique exhaust note, future power mods |
One-line recommendation:
With Muffler vs Without Muffler: mainly the difference is in sound and drone; performance difference is very small. With muffler is quieter, with less highway/towing drone; without muffler is louder and more “raw,” but prone to low-frequency drone.
4-inch vs 5-inch: 4-inch suits stock/light-mod daily use, with good flow velocity, good low-end response, and less drone; 5-inch suits high-power heavy mods, with a higher flow ceiling, but on stock/light mods it may lose low-end torque and have more drone.
You currently selected 4″ DPF Delete: retains upstream CAT/DOC, smallest sound change, suitable for limited budget, only solving DPF backpressure, and not wanting it too loud.
| Option | What It Removes | Main Problem Solved | Quick Recommendation |
|---|---|---|---|
| EGR Delete | Removes only EGR valve/cooler/pipes | Stops EGR soot, protects intake and intercooler | Solves soot only; throttle valve risk remains |
| EGR Throttle Valve Delete | Removes only intake throttle valve body | Eliminates risk of unexpected throttle valve closing/stalling/turbo damage; intake flows better | Removes risk only; soot source remains |
| EGR & Throttle Valve Delete | Removes both EGR and throttle valve | Cuts soot source + removes intake risk | Most thorough, most recommended; directly choose this for All-in-One kit |
One line: Since you are already doing a Delete Kit, directly choose EGR & Throttle Valve Delete; do not leave a weak point.
Color: Black, red, and silver are only the surface coating colors of the EGR delete hardware; purely cosmetic appearance, with no effect on performance, reliability, or installation.
Versions A/B/C: not performance levels. Confirm the version by kit images, bracket design, and accessory list. Confirm the required components and installation design first, then choose a color within that version.
| Option | Core Positioning | What It Means for 2007.5–2012 |
|---|---|---|
| Mini Maxx V1 | Classic, stable, plug-and-play preloaded tuner | One of the best-matched year ranges for V1; flash directly, simplest and most worry-free |
| Mini Maxx V2 | 2022 updated version of V1, compatible with later years | Advantage on newer trucks (2013+); for your older truck, core delete functions are the same as V1 |
| EZ Lynk (AutoAgent 3) | Cloud platform, supports custom/remote tuning | Higher cost, hardware + tuning files; better for users with future heavy mod plans needing custom tuning |
Hardware quick pick: For 2007.5–2012 Cummins, pursuing simple, cheap, stable, V1 is the most direct logical match. Only when you clearly plan future heavy hardware upgrades, need custom tuning, and confirm EZ Lynk supports your specific year should you consider EZ Lynk.
"4 weeks" vs "Lifetime": This is the tuning support period in the EZ Lynk system.
Support period quick pick: If you are sure you will not touch engine/turbo hardware after this delete, 4-week support is enough to get a usable tune; if you may change turbo, upgrade injectors, or want to retain tuning adjustment margin long-term, Lifetime saves repeated paid purchases of new tuning files. (You currently selected Mini Maxx V1, so this EZ Lynk support period choice does not apply.)
Shipping
Free shipping within the contiguous 48 US states; does not ship to AK/HI, PO Box, APO/FPO. The kit ships in multiple packages; check package count on delivery and inventory each item against the packing list after opening; do not wait until installation day to discover missing parts. ZIP code estimated delivery time is supported.
Returns
General items can be returned within 45 days after receipt, must be unused, in original condition and packaging. Tuner special: all tuner sales are final; returns/exchanges are only provided with proof of performance or material defect; DPF pipe and EGR kit still apply under the 45-day framework.
Practical advice: After all packages arrive, do not install immediately. Check hardware appearance, model, quantity, and confirm the tuner model matches the description. Once hardware is installed, the return window is basically closed; if unsure, contact customer service before installation to leave a record.
Warranty and Support
The All-in-One after-sales advantage is a single entry point—DPF, EGR, and tuner come from the same order, so you do not need to do three-way fault attribution between different sellers. If the guide does not cover your specific configuration, contact customer service before installation; do not look for a solution halfway through installation.
Many people leave the tuner to the end, then after hardware is installed the truck will not start or shows a bunch of codes, and they have to go back and find a tune. The correct order is the reverse.
This product is intended for off-road, racing, or competition use only and is not legal for public road use or for vehicles subject to emissions regulations in the United States. Vehicles equipped with this product may fail emissions or state inspections.
Customers are responsible for ensuring compliance with all applicable local, state, and federal laws. Installation of aftermarket parts may also affect your vehicle warranty—please consult your manufacturer for warranty coverage.
International legality may vary; users should confirm local laws before installation.
| 5 Star |
|
|
100% |
| 4 Star |
|
|
0% |
| 3 Star |
|
|
0% |
| 2 Star |
|
|
0% |
| 1 Star |
|
|
0% |